FAQ Product pages

Place your foot on the step and simultaneously press the release lever on the folding mechanism. At the same time, grab the handlebars with both hands and push them forward away from you. The release lever comes loose and you can fold the scooter easily and with little effort. Never use force or tools - this is never necessary.

As a rule, the fault here is that a plug is loose somewhere or that it fails due to a loose connection. Something small that is preventing the scooter from flowing electricity in all the major parts. For example, it can also be due to a missing blade fuse / not activated main fuse. The scooter is activated, i.e. the front light lights up, the LEDs light up but the engine does not turn: 1. The side stand must be raised for the throttle to work. 2. The plug connections on the control unit must be checked here. Unplug individually and reconnect. Also check the wiring from the throttle grip - this is the cable from the throttle grip come follow and check.

The display may be defective. The display on these models is also the board computer. You can replace it. Loosen the 4 screws from the display cover, as well as the 2 screws on the display board and disconnect the plug connections on the underside. Then install a new display. Caution: Make sure that the plug connections are connected correctly! For the display to work, the two screws that were on the display board must be reconnected. The battery may be empty.

Readjust the steering head bearing.